Mechanical performance test
Tensile test, Bending test, Impact test, Torsion test, Compression test, Shear test，Flaring test, Cupping test, Flattening test
Non-metallic inclusions, Low magnification, Grain size, Fracture inspection, Coating thickness, Hardened layer depth, Decarburized layer, Gray cast iron metallography, Ductile cast iron metallography, PCB metallographic slice analysis
Fracture analysis, Scanning electron microscope, energy spectrum analysis, Mechanical test, Chemical analysis, Nondestructive testing, Hardness test, Low magnification inspection, Carburized layer, Non-metallic doping (inclusion), Microstructure
Chemical composition analysis
Metal composition analysis required for die casting, melt casting, iron and steel metallurgy, plus non-ferrous metal industries; incoming and outputting material composition inspection, and metal material composition analysis for automobiles, machinery manufacturing.
Carbon, Sulfur, Oxygen, Nitrogen analyzer method, Direct reading spectrometer method,
Chemical element analysis:
Carbon (C), Sulfur (S), Silicon (Si), Phosphorus (P), Manganese (Mn), Nickel (Ni), Chromium (Cr), Platinum (Mo), Copper (Cu), Vanadium (V), Titanium (Ti), Niobium (Nb), Aluminum (Al), Boron (B), Tungsten (W)
Metal coating material identification, Coating thickness, Coating microstructure observation, Coating adhesion, Coating corrosion resistance, Coating hardness
FARO PRIME 2.4m 6-axis articulated arm measurement system can be used on measuring the geometric dimensions, geometric tolerances, 3D coordinate inspection, reverse engineering, CAD digital and analog analysis of the parts, and any high-precision inspection that requires hard-side contact measurement.
Dimensional analysis | CAD-based inspection | Positioning